Home > Brand > TI > TXS0108EPWR-Buy Texas Instruments parts

Texas Instruments TXS0108EPWR is an 8-bit bidirectional voltage-level converter for open-leak

and push-pull applications

The 8-bit non-reverse converter uses two separate configurable power tracks.

Port A tracks the supply voltage of the VCCA pin. The VCCA pins can accept any power supply voltage in the range of 1.2V to 3.6V.

Port B tracks the supply voltage of the VCCB pin. The VCCB pins can accept any power supply voltage in the range of 1.65V to 5.5V.

These two input power supply pins can realize any low-voltage bidirectional conversion between the 1.2V,1.8V,2.5V, and 3.35V voltage nodes.

When the output-enable (OE) input is at a low level, all the outputs are placed in a high impedance (Hi-Z) state.

To ensure that the output is on or off Hi-Z, the OE should be connected to the GND by a pull-down resistance.

The minimum value of this resistance depends on the pull current capacity of the drive.

    Original Texas Instruments, a trusted supplier of electronic components, looking to receive your purchase order.